Stengel Bros. Inc.
 WE ACCEPT ALL MAJOR CREDIT CARDS

1-888-433-3149
 Email:ProductSupport

CONTENTS
Home
Up
U-bolts
Leveling Valve
Alignment

Alignment Fundamentals  

Please us our Contact Form to inquire about rear and front end alignment shims and parts.  You can also give us a call on our toll-free number during our business hours.  We have a wide range of parts and shims that will correct your alignment problems.                                                                               

     

 

   Front End Alignment Toe - adjust toe in to reduce tire wear and avoid vehicle wander

    front end alignment                                

      Typical Correction: Adjust length between tie rod ends or replace parts as needed    

 excessive toe out               excessive toe in

      Feathered Edge going outward                          Feathered edge going inward             

 

 

  
   

 

 Front End Alignment Camber - adjusted to reduce tire wear

                                           

                   Inside Tire Wear                                          Outside Tire Wear

      Typical Correction: Shims, bend axle, or adjust with proper equipment   

 Front End Alignment Caster - adjusted to correct vehicle handling issues

  front end alignment caster

       Typical Correction: Shim both sides or bend axle               

 King Pin Inclination - checked to determine if a spindle or axle is bent

         

Rear Axle Tracking - adjusted to ensure all rear axles are traveling 90 degrees to the center of the frame

 rear axle tracking for heavy trucks and trailers

Bottom Line - Correct vehicle alignment saves money on tire cost (more than 30% increase in tire mileage) and even fuel costs (up to 2%).

Stengel Bros. Inc.

WE SHIP UPS ANYWHERE  
Copyright (c) 2001 Stengel Brothers Inc.
Front End Alignment Fundamentals - Order Alignment Parts and Shims
1105 Sumner Ave
Whitehall, PA  18052
610-433-3149
Email:ProductSupport