|
|
-
Ideal for carrying heavy loads
-
Reduce sway
-
Improve roll stability
-
Our Front and Rear Suspension Kits
perform
-
Light, durable suspension;
smooth ride
-
Easy
Installation
-
Lifetime Warranty
|
|
Timbren Ride Control products enhance a
vehicle's empty ride quality, while providing
protection against overloading, road shock,
bottoming out, sway and broken springs. Front
axle kits prevent front end nose diving.
Together, these features provide a smooth,
level ride, even with heavy loads.
Today's on and off road vehicles are well
engineered with fine suspensions, built to do
the job for which they were designed.
However, many vehicles are overloaded, or
drivers find themselves on bad roads or
operating under unusual conditions where the
suspension needs help. Aeon Hollow Rubber
Helper Springs were designed to meet these needs. Timbren ride control kits and suspension kits
help to eliminate sway and bottoming out, get
rid of axle hop, and give an even, level,
stable ride, both while loaded and unloaded.
Timbren kits are simple to install and
require no alteration to your present
suspension. |
|
APPLICATION GUIDE
By clicking the application guide, you can
find the pricing and the capacity of the
Timbren (overload springs) kit for your vehicle. You can
conveniently order online with confidence on
our secured site.
|
Trailer
Sway - Eliminate wallowing along
the highway, drifting in crosswinds or
when passing heavy trucks. For more
driver and passenger comfort Timbren
suspension enhancement systems sense
vehicle body movement and automatically
increase roll stability.
|
Suspension Sag - Heavy loads cause
the front or rear suspensions to deflect
lower than is desired. Powerful,
durable
hollow rubber cushions help carry the
heaviest loads with ease. Road shock is
absorbed, reducing wear and tear on
suspensions. Bottoming out on bumps is
eliminated.
|
Body Roll - If your vehicle leans
on corners or curves Timbren progressive
rate suspension kits can improve weight
distribution to all 4 corners of the
vehicle. This helps to keep the vehicle
level, improves steering, and reduces
brake and tire wear.
|
Rough Ride - You feel every bump
in the road and every expansion joint.
Rubber cushions in each Timbren kits are
designed to soak up road shock and bumps.
The result is a smooth, stable rubber
cushion ride.
|
|
Timbren Overload Springs are great for towing, snow plows, and
Recreational Vehicles! |
 
|
| |
- Timbren has proven to be
reliable even in areas where the
heaviest snowfalls occur.
- Timbren Ride Quality products are
specified by municipal, state and
highway departments for all snow
removal equipment.
- Whether you use a pickup to clear a
small driveway or a class 8 highway
truck with a wing blade, Timbren
Industries has a suspension enhancement
system designed to provide a safe and
level ride for plowing snow in the
toughest of environments.
- These high performance suspension
kits are specified on most state,
county and provincial transport
equipment for snow plowing. Many
snowplows are also equipped with very
high center of gravity salt spreaders
carrying heavy loads that induce sway.
The rear suspension enhancement system
will improve roll stiffness and absorb
road shock.
- Full Line:
Timbren carries a complete line of
suspension stabilizer kits.
- Cost Efficient:
Reduced maintenance costs and less
downtime for snowplow operators
- Smoother Ride:
eliminate the high cost and harsh ride
caused by added leaf springs or helper
springs to carry rear mounted/top heavy
spreaders
- Longer Suspension
Life:
AEON Hollow Rubber Springs carry
most of the added vehicle load,
allowing a much longer life for your
truck's suspension
- Extra capacity when the plow is
mounted; A smooth ride at all times
- When the snowplow is installed,
powerful
Aeon Hollow Rubber Springs
progressively carry the additional
weight, preventing spring sag and
bottoming out
- The design of the Timbren kit and
the progressive rate of the Aeon spring
mean that there is no interference with
the normal activity of the suspension
when the snowplow is removed.
|
|
|
Installing
a Timbren Product

Timbren kits are mounted between the
frame and the axle of light duty trucks
or between the frame and the leaf
springs of medium and heavy duty
trucks. Timbren Hollow Rubber helper springs
work in conjunction with the existing
suspension to improve your ride and to
protect the vehicle against the effects
of overloading.
No special tools or skills are required
to install most Timbren kits. Just
follow the easy to understand
instructions. Within a short period of
time, you will experience enhanced
handling and increased stability (both
front and rear applications) on your
vehicle. Moreover, Timbrens
are guaranteed for the life of the
vehicle.
 |